| |
|
Shelf Cabinet, Open
An open cabinet can be added to either or both sides of the desk.
Standard width is 24”. You may specify any width. Two adjustable
shelves are held short to allow for ventilation and cord passage.
Recessed shelf pins hold them securely. The base of the cabinet has a
7”x9” removable floor access panel to allow access to floor boxes. The
cabinet is on levelers or casters as required. The cable chase
provided on all desks enters the cabinet at the top rear. |
| |
|
DCO-S No Door (shown) |
Add $400 |
| DCS-S
Standard Door |
Add
$670 |
| DCP-S
Pocket Door |
Add
$830 |
|
|
| |
|
 |
| |
|
|
Shelf Cabinet, Standard
Locking Door
A cabinet with a locking door can be added to either or both sides
of the desk. You may specify any width, default is 24”. Two adjustable
shelves are held short to allow for ventilation and cord passage.
Recessed shelf pins hold them securely. Cabinet base has a 7”x9”
removable floor access panel to allow access to floor boxes. A 10”x10”
vent is placed in the floor and in the kneehole to provide
ventilation. A locking rear access panel gives access to equipment.
The cabinet is on levelers or casters as required. The cable chase
enters the cabinet at the top rear. |
| |
|
DCS-SA Standard Door (shown) |
Add $1020 |
| DCO-SA
No Door |
Add
$750 |
|
|
| |
|
|
|
| |
|
|
Shelf Cabinet, Locking
Pocket Door
A cabinet with a locking pocket door can be added to either or both
sides of the desk. You may specify any width, default is 28”. Two
adjustable shelves are held short to allow for ventilation and cord
passage. Recessed shelf pins hold them securely. The base of the
cabinet has a 7”x9” removable floor access panel to allow access to
floor boxes. A 10”x10” vent is placed in the floor of the cabinet and
in the kneehole to provide ventilation. A locking rear access panel
gives access to equipment. The cabinet is on levelers or casters as
required. The cable chase provided on all desks enters the
cabinet at the top rear. |
| |
|
DCP-SA Pocket Door (shown) |
Add $1180 |
|
|
| |
|
|
|
| |
|
|
Rack Cabinet
This cabinet is fitted with standard, black, threaded rack rails. A
locking access panel on the back (or side) of the cabinet gives easy
access to the equipment in the rack. Ventilation is provided by
10”x10” vents in the floor of the cabinet and in the kneehole. A 7”x9”
floor access panel gives access to floor boxes. The cable chase enters
the cabinet at the top rear. |
| |
|
DC0-RA No Door |
Add $750 |
| DCS-RA
Standard Door (shown) |
Add
$1020 |
| DCP-RA
Pocket Door |
Add
$1180 |
|
|
| |
|
|
|
| |
|
|
Tower CPU/Rack Cabinet
This cabinet adds a locking tower CPU cabinet to the rack cabinet.
The locking rear access panel uncovers both when removed. Ventilation
is provided by 10”x10” vents in the floor of the cabinet and in the
kneehole. The partition between the rack and CPU sections stop short
to allow ventilation and cabling. A 7”x9” floor access panel gives
access to floor boxes. The cable chase enters the cabinet at the top
rear. |
| |
|
DCO-CRA No Doors |
Add $900 |
| DCS-CRA
Standard Doors |
Add
$1430 |
| DCP-CRA
Pocket Doors |
Add
$1730 |
|
|
| |
|
|
|
| |
|
|
Document Camera Drawer,
Tower CPU and Rack Cabinets
This cabinet adds a locking tower CPU cabinet to the document camera
cabinet. Ventilation is provided by 10”x10” vents in the floor of the
cabinet and in the kneehole. The partition between the rack and CPU
sections stop short to allow ventilation and cabling. A 7”x9” floor
access panel gives access to floor boxes. The cable chase provided on
all desks enters the cabinet at the top rear. |
| |
|
DCO-DCRA No Doors |
Add $2110 |
| DCS-DCRA
Standard Doors (shown) |
Add
$2910 |
| DCPS-DCRA
Standard Doors/Pocket Door - CPU Cabinet only |
Add
$3070 |
| DCPP-DCRA
Pocket Doors - CPU and Rack Cabinets |
Add
$3370 |
| Large Document
Camera Drawer, Tower CPU Cabinet, Rack Cabinet, Rear Access
Panel |
| DCO-LDCRA
No Doors |
Add
$2590 |
| DCS-LDCRA
Standard Doors |
Add
$3390 |
| DCPS-LDCRA
Pocket Door - CPU Cabinet only |
Add
$3550 |
| DCPP-LDCRA
Pocket Doors - CPU and Rack Cabinets |
Add
$3850 |
|
|
| |
|
|
|
| |
|
|
Document Camera Drawer and
Cabinet below
This cabinet has a document camera drawer and a locked cabinet
below. The drawer opens to the side or t o the rear of the desk. The
cabinet below has one shelf. A desktop CPU will fit easily. Rack rail
and a rear access panel may be added to this cabinet. Ventilation is
provided by 10”x10” vents in the floor of the cabinet and in the
kneehole. A 7”x9” floor access panel gives access to floor boxes. A
cable chase enters the cabinet at the top rear. |
| |
|
DCS-DS Shelf Cabinet, Standard Door (shown) |
Add $1790 |
| DCP-DS
Shelf Cabinet, Pocket Door |
Add
$1950 |
| DCS-DRA
Rack Cabinet, Rear Access Panel, Standard Door |
Add
$2140 |
| DCP-DRA
Rack Cabinet, Rear Access Panel, Pocket Door |
Add
$2300 |
| Large Document
Camera Drawer |
| DCS-LDS
Shelf Cabinet, Standard Doors |
Add
$2530 |
| DCP-LDS
Shelf Cabinet, Pocket Doors |
Add
$2570 |
| DCS-LDRA
Rack Cabinet, Rear Access Panel, Standard Doors |
Add
$2880 |
| DCP-LDRA
Rack Cabinet, Rear Access Panel, Pocket Doors |
Add
$2920 |
|
|
| |
|
|
|
| |
|
|
Flush Monitor Mounts
We can build a mount to hold most LCD and CRT monitors below the desk
surface. The cutout in the desktop can have a wood, plexiglass or
tempered glass cover. If security is an issue, the cover can be framed
and made to lock. Generally this mount is model specific therefore, it
is necessary for the monitor to be in our shop before production can
begin. |
| |
|
M-FMON-W with Solid Wood Cover |
$720 |
| M-FMON-PG
1/4" Plexiglass |
$720 |
| M-FMON-TG
1/4" Tempered Glass |
$820 |
| M-LCD-S
Locking Wood Framed Plexiglass Cover |
$990 |
|
|
| |
|
|
|
| |
|
|
Open LCD Monitor Mount
This is a simple mount that lowers the monitor into the desktop to
reduce its visual impact. The monitor angle and direction can be
adjusted normally. Generally this mount is not model specific and will
accommodate most monitors. However it is best if we have the monitor
or at least a cut sheet before construction because the variation in
dimensions between models is very wide. |
| |
|
M-MON-L Open LCD Mount |
$500 |
|
|
| |
|
|
|
| |
|
|
LITTLITE Gooseneck
Lights
The Halogen lamp is high quality, 5 watt with an 18” gooseneck. Puts
just the right amount of light where you need it and it has a dimmer.
The LED light has the same construction but uses a
one red and 2 clear LED lights. The two position switch offers all
the lights or just the red light for a minimally distracting light.
The LED light runs very cool. |
| |
|
MHL-8 Halogen Light |
$130 |
| MHL-Bulb
5 Watt Bulb |
$16 |
| M-LED
LED Light |
$230 |
|
|
| |
|
|
|
| |
|
|
Medium Cable Reservoir
Holds 2 AC outlets, large grommet for VGA cable and 3 small grommets
for RJ-45, Audio and LAN connections. A 6-outlet surge protector is
included with the reservoir. |
| |
|
CABLE-M Medium Reservoir, Black Finish |
$320 |
| CABLE-MS
Medium Reservoir, Brushed Stainless |
$390 |
| CABLE-MB
Medium Reservoir, Solid Brass |
$520 |
|
|
| |
|
|
|
| |
|
|
Locking Storage Drawer
A drawer designed to hold supplies, remote controls, telephones,
cables, pencils, etc. Size is determined by application and placement. |
| |
|
MDR-S Small Locking Storage Drawer |
$450 |
| MDR-L
Large Locking Storage Drawer (24+) |
$670 |
|
|
| |
|
|
|
| |
|
|
Fixed Height Keyboard Shelf
Keyboard shelf pulls out for use. |
| |
|
M-KS Keyboard Shelf, Fixed Height
|
$350 |
|
|
| |
|
|
|
| |
|
|
Hidden Caster Option
To make a desk mobile on hidden casters, the non cabinet leg(s) need
to be built up to hide the caster and to allow it to swivel properly. |
| |
|
HCO Hidden Caster Option |
$320 |
|
|
| |
|
|
|
| |
|
|
Lectern Top Option
A lectern top is often specified on desk with lifts (height
adjustment). In the down position a person seated on a chair, stool or
wheelchair can easily see and be seen. In the up position the desk is
used as a lectern by a standing presenter. |
| |
|
DLT-A Slant Lectern Top (not shown) |
Add $550 |
| DLT-B
Flat Lectern Top (shown) |
Add
$550 |
| DLT-C
Split Lectern Top (not shown) |
Add
$990 |
|
|
| |
|
|
|
| |
|
|
Desktop Lectern
Adding a lectern to a desk allows for standing as well as seated
presenters. It is an economical way to comply with ADA requirements as
the desk is wheelchair accessible. A typical desktop lectern is 24”
wide, 15” tall and 17” deep. You may specify different dimensions. |
| |
|
MPL-24 Desktop Lectern |
Add $400 |
|
|
| |
|
|
|
| |
|
|
CPU Shelf
Shelf may be mounted to cabinet inside kneehole. |
| |
|
|
|
| |
|
|
|
| |
|
|
Height Adjust Option
The lift system is electric/hydraulic, very quiet and
reliable. It lifts an unbalanced load 750 lbs. with no deflection or
shaking. Larger capacity lifts are available. The compact system takes
up only 2-3/4” on each end of the desk and on larger desks, 2-3/4” in
the center. The actuators are completely hidden. The entire cabinet is
unobstructed so the interior can be fitted with shelves, rack and
drawers. |
| |
|
MLM-HDM6 Desk Electric/Hydraulic Lift |
$3650 |
|
|
Custom Presentation Furniture
