Order any AmpliVox lectern and we will include our
S1180 LED Lectern Light at no additional cost


This LED lamp provides a bright, focused light on your presentation while not blinding you nor distracting your audience. The 9” flexible gooseneck allows you to easily aim the light where you need it.

Powered by THREE “AAA” batteries (not included), this bright white LED light is rated at 100,000 hours.

×
System D: Installed Horn Speaker System
System E: Installed Multimedia Package
System F: Installed Multimedia Package #2
System G: Installed Deluxe Multimedia Package
System H: Installed Deluxe Multimedia Package #2


Any Questions - Need Help?

We want to assist you with any of your questions: technical, product capabilities or usage scenarios.

We strive to serve you in any way we can, so let us know how we can help.

Name:
E-mail:
Phone:
Subject:

Question:


Please answer addition below:
6 + 6 =



Download Our 2017 Catalog
Ice Hockey When the puck is dropped, hockey stadiums can get noisy and hard to hear a coach or announcer.

Using AmpliVox portable and installed PA systems designed for hockey arenas, you can make sure that every set of ears in the house hears what you want them to, from a coach’s practice instruction, to the national anthem, to the announcer’s fevered play- by-play.

AmpliVox portable systems are easy to set up and use, and installed systems are always waiting for you to power-up and start talking.




Recommended Systems: D, E, F, G, H




Installed Public Address Systems: * System D: Installed Horn Speaker System
System E: Installed Multimedia Package #1
System F: Installed Multimedia Package #2
System G: Installed Deluxe Multimedia Package #1
System H: Installed Deluxe Multimedia Package #2
* Installation is required by customer or a third party

System D: Installed Horn Speaker System *
* Installation is required by customer or a third party

System D: Installed Horn Speaker System

SW805A 50-watt Wireless Multimedia Stereo Amplifier

Two S1267 Horn Speaker with Adjustable Wall Mount

AmpliVox Handheld Wireless Microphone
  • SW805A - Wireless Multimedia Stereo Amplifier
  • 50 Watt Multimedia Stereo Amplifier, SW805A (with built-in 16 channel wireless UHF receiver)
  • 16 Channel UHF wireless receiver from 584MHz - 608MHz
  • AmpliVox handheld wireless microphone
  • 3 mic inputs (dynamic, condenser, wireless) can be used at the same time
  • Line-in with separate Volume & Tone controls for CD/Computer Projector
  • Line-out to record presentation in real time
  • 2 speaker jacks
  • S1267 - Horn Speaker with Adjustable Wall Mount
  • Wide Range Horn Add-On Horn Speaker
  • Comes with hardware for mounting on any flat surface
  • Easily adjust angle with wingnut.
  • Almost 180 degrees of pivot action - 15-in. speaker cable.
Specifications
  • SW805A - Wireless Multimedia Stereo Amplifier
  • Product Dimensions: 4" H x 9" W x 9" D
  • Product Weight: 3 lbs.
  • 6 Year Limited Warranty
  • Spec Sheet

  • S1267 - Horn Speaker with adjustable wall mount
  • Product Dimensions: 12" H x 11" W x 10" D
  • Product Weight: 6 lbs.
What's in the Box
  • SW805A Wireless Multimedia Stereo Amplifier
  • Two S1267 Horn Speaker with Adjustable Wall Mount
  • AmpliVox handheld wireless microphone
System E: Installed Multimedia Package *
* Installation is required by customer or a third party

System E: Installed Multimedia Package

Yamaha EMX2 Mixer and Amplifier

Two Community R.25 Loudspeaker

AmpliVox Handheld Wireless Microphone
  • Yamaha EMX2
  • Both a mixer and a power amplifier
  • 500 Watt
  • Tabletop or Rackmount
  • Connect speakers and mics to have a fully functioning sound system
  • Easily configure your own sound reinforcement system
  • Community R.25 Loudspeaker
  • Two-Way, Full Range, Weather-Resistant Loudspeaker
  • Optional 200W, 70V autoformer
  • Weather-treated drivers and crossovers
  • Weather-resistant, rotomolded UV enclosure with corrosion-resistant zinc-rich epoxy dual-layer powder-coated steel grille and yoke
  • High efficiency, high fidelity, all horn loaded with high power passive crossover
Specifications
  • Yamaha EMX2
  • Product Dimensions: 5.8" H x 14.8" W x 8.7" D
  • Product Weight: 9.3 lbs
  • Operating Temperature: 0 to 40°C
  • Spec Sheet

  • Community R.25 Loudspeaker
  • Product Dimensions: 11.3" H x 11.3" W x 13.3" D
  • Product Weight: 20 lbs.
  • Nominal Beamwidth (H x V): 90° x 40°
  • Power Handling: 200 W continuous @ 8 ohms
  • Continuous Max Output: 120 dB (126 dB Peak)
  • Operating Range: 100 Hz – 16 kHz
  • Sensitivity (1W/1m): 97 dB
  • Transducers: LF 1 x 8” Cool-Coil cone; HF - 1 x 0.75” exit Ferrofluid-cooled compression driver
  • Spec Sheet
What's in the Box
  • Yamaha EMX2 Mixer
  • Two Community R.25 Loudspeaker
  • AmpliVox Handheld Wireless Microphone
System F: Installed Multimedia Package #2 *
* Installation is required by customer or a third party

System F: Installed Multimedia Package #2

QSC GX3

Tascam LM-8ST


Two Community R.25 Loudspeaker

AmpliVox Handheld Wireless Microphone
  • QSC GX3
  • Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
  • Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
  • Outputs: Speakon® combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
  • Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
  • Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
  • Detented gain controls for precise setting and matching of sensitivity
  • GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
  • Front panel LEDs monitor power, signal, and clipping
  • Subwoofer/satellite crossover built-in
  • Tascam LM-8ST
  • 8 stereo channel / 4-buss line mixer
  • (8) stereo 1/4" TRS balanced inputs with -10/+4dB switch
  • 1U rack mountable
  • Mic input with trim control on front panel
  • 2-segment LED meter per channel
  • ST1 and ST2/AUX level control per channel
  • ST1 and ST2/AUX master level controls
  • Each channel switchable to ST2 (pre fader) or AUX (post) output
  • 1/4" and 1/8" stereo headphone outputs
  • XLR balanced ouptuts for ST1 and ST2/AUX
  • Stereo balanced buss output/input for cascade
  • Ground lift switch and terminal
  • Community R.25 Loudspeaker
  • Two-Way, Full Range, Weather-Resistant Loudspeaker
  • Optional 200W, 70V autoformer
  • Weather-treated drivers and crossovers
  • Weather-resistant, rotomolded UV enclosure with corrosion-resistant zinc-rich epoxy dual-layer powder-coated steel grille and yoke
  • High efficiency, high fidelity, all horn loaded with high power passive crossover
Specifications
  • QSC GX3
  • Product Dimensions: 3.5" H x 19" W x 10.1" D
  • Product Weight: 27 lbs
  • Spec Sheet

  • Tascam LM-8ST
  • Product Dimensions: 1.73" H x 19" W x 11.02" D
  • Product Weight: 8.4 lbs
  • Spec Sheet

  • Community R.25 Loudspeaker
  • Product Dimensions: 11.3" H x 11.3" W x 13.3" D
  • Product Weight: 20 lbs.
  • Nominal Beamwidth (H x V): 90° x 40°
  • Power Handling: 200 W continuous @ 8 ohms
  • Continuous Max Output: 120 dB (126 dB Peak)
  • Operating Range: 100 Hz – 16 kHz
  • Sensitivity (1W/1m): 97 dB
  • Transducers: LF 1 x 8” Cool-Coil cone; HF - 1 x 0.75” exit Ferrofluid-cooled compression driver
  • Spec Sheet
What's in the Box
  • QSC GX3
  • Tascam LM-8ST
  • Two Community R.25 Loudspeaker
System G: Installed Deluxe Multimedia Package *
* Installation is required by customer or a third party

System G: Installed Deluxe Multimedia Package

Crown XTi
4002

Mackie
ProFX16v2


Four Community R.5 Loudspeaker

AmpliVox Handheld Wireless Microphone
  • Crown XTi 4002
  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable
  • Mackie ProFX16v2
  • 16 Input Channels
  • 10 Low-Noise Mackie Vita Mic Preamps
  • USB Recording to Computer (Mac & Win)
  • 16 FX Including Reverb, Delay & Chorus
  • Per Channel 3-Band EQ
  • Dual 7-Band Graphic EQ
  • Stereo RCA Tape Input
  • Monitor & FX Sends, Stereo & FX Returns
  • Community R.5 Loudspeaker
  • Two-Way, Full Range, Weather-Resistant Loudspeaker
  • High efficiency with pattern control down to 630 Hz
  • Weather-resistant, rotomolded UV enclosure with corrosion-resistant zinc-rich epoxy dual-layer powder-coated steel grille and yoke
  • Weather-treated drivers and crossovers
  • High power passive crossover, DYNA-TECH protection circuitry
Specifications
  • Crown XTi 4002
  • Product Dimensions: 3.5" x 19" x 12.25"
  • Product Weight: 18.5 lbs
  • Spec Sheet

  • Mackie ProFX16v2
  • Product Dimensions: 3.8" H x 18.7" W x 16" D
  • Product Weight: 13 lbs

  • Community R.5 Loudspeaker
  • Product Dimensions: 16" H x 16" W x 15.94" D
  • Product Weight: 35 lbs.
  • Operating Range: 85 Hz – 16 kHz
  • Sensitivity (1W/1m): 103 dB
  • Power Handling: 200 W continuous @ 8 ohms
  • Continuous Max Output: 126 dB (132 dB Peak)
  • Nominal Beamwidth (H x V): -66 (60° x 60°), -94 (90° x 40°),-99 (90° x 90°)
  • Spec Sheet
What's in the Box
  • Crown XTi 4002
  • Mackie ProFX16v2
  • Community R.5 Loudspeaker
System H: Installed Deluxe Multimedia Package #2 *
* Installation is required by customer or a third party

System H: Installed Deluxe Multimedia Package #2

Crown XTi
4002

Mackie
ProFX16v2


Two Yamaha C115VA Loudspeakers

AmpliVox Handheld Wireless Microphone
  • Crown XTi 4002
  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet System Architect™ control software
  • Increased number of presets to a total of 50; 49 of which are user definable
  • Mackie ProFX16v2
  • 16 Input Channels
  • 10 Low-Noise Mackie Vita Mic Preamps
  • USB Recording to Computer (Mac & Win)
  • 16 FX Including Reverb, Delay & Chorus
  • Per Channel 3-Band EQ
  • Dual 7-Band Graphic EQ
  • Stereo RCA Tape Input
  • Monitor & FX Sends, Stereo & FX Returns
  • Yamaha C115VA Loudspeaker
  • 500 Watt
  • 15" 8ω
Specifications
  • Crown XTi 4002
  • Product Dimensions: 3.5" x 19" x 12.25"
  • Product Weight: 18.5 lbs
  • Spec Sheet

  • Mackie ProFX16v2
  • Product Dimensions: 3.8" H x 18.7" W x 16" D
  • Product Weight: 13 lbs

  • Yamaha C115VA Loudspeaker
What's in the Box
  • Crown XTi 4002
  • Mackie ProFX16v2
  • Yamaha C115VA Loudspeaker
PA System Reviews from Our Customers


Suggested Products: You May Also Like ...